Pop the front cover off and inspect the backside of the USB connection. If it's loose reconnect or hot glue it into place. If it's broken buy a replacement from the manufacturer via email ticket. Check the not working one with with a USB flash or something that uses less than 500ma.

Method 2: Update the driver. Go to Control Panel - Device Manager, Right click on “Universal Serial bus controller”. Select “Properties”. Click on “Driver”. Select “update” driver. Download and install the latest Chipset drivers and check. Method 3: Run SFC Scan. SFC/Scannow checks your Windows installation for errors and

If no devices work in the port, check inside your PC to see if the connection inside might just need to be replaced. This problem likely would solve the issue for instance for front USB ports, where two or more ports share a common connection to your motherboard. You may also check your case to see if a connection at the case between the ports For win 10: Step 1: Press the 'Win + R' keys to open the Run dialogue box. Step 2: Type 'mdsched.exe' and press Enter to run it. Step 3: Choose either to restart the computer and check for problems or to check for problems the next time you restart the computer. 3. more replies.
The front USB ports or the rear USB ports (USB 2.0 or 3.0)? If the front USB ports are not working, then he might not have connected the front panel cable to the motherboard USB header. If the rear USB ports are not working then the motherboard is faulty. [/quotemsg] I have added the specs in the description and it seems none of the USb ports
Right-click on the USB ports and click on “ Properties ,” and a prompt “This device is working properly” should appear. If this prompt does not appear, then you should click on “ Update Driver.”. The update will take roughly three minutes, and your port will be ready to use. If the port is still not working, then try the next method. Your best best is to roll-back the update: Type and search [Recovery options] in the Windows search bar①, then click [Open] ②. In Recovery options, click [Go back] ③. If this option is unavailable, maybe 10 days have passed or other circumstances caused. Select an answer or type more details④, then click [Next] ⑤.
But if not, you have tried all the usb ports, maybe there is only the option for certain categories? I didn't talk about sleep mode options, because I was just looking for the computer to turn off completely In sleep mode, a priori, if you have the right configurations, it should work but I have a doubt, for the computer completely off
Note: If your computer has USB 3.0 ports, you’re likely to see USB Root Hub (3.0) listed under Universal Serial Bus Controllers. Also, depending on the nature of your computer’s port, you may see more than one USB Root Hub listed. Simply repeat the procedure for each one. Then reboot the system. .
  • 8c2kyue936.pages.dev/11
  • 8c2kyue936.pages.dev/436
  • 8c2kyue936.pages.dev/194
  • 8c2kyue936.pages.dev/355
  • 8c2kyue936.pages.dev/457
  • 8c2kyue936.pages.dev/166
  • 8c2kyue936.pages.dev/180
  • 8c2kyue936.pages.dev/187

    • pc usb ports not working